DIY Bird Feeder Plans (Homemade Log Birdfeeder)
Learn how to make this hanging log bird feeder from a natural log or fallen tree. This homemade DIY bird feeder will attract chickadees, nuthatches, woodpeckers, house finches, goldfinches, and bluebirds to your yard or garden. In under 15 minutes, you can create this rustic handmade seed feeder using a recyled or upcycled log. Find more ideas on bird feeders plans and DIY bird feeders.
Materials and Tools Needed to Make DIY Log Bird Feeder
- Log 5-9 inches (13-23cm) in diameter.
- Chainsaw and bandsaw.
- A love for bird watching or an act of kindness!
Step #1: Use a chainsaw to cut a log 5-9″ (13-23cm) in diameter.
Step #2: Cut off 1″ (2.5cm) discs on both ends.
Ideal dimensions for log bird feeder are shown below.
Step #3: Mark center area to be removed.
Step #4: Use a bandsaw to remove center.
Step #5 (Option A): Attach round discs created in Step #2 to both ends of birder feeder.
Step #5 (Option B): Create ends for bird feeder from center piece created in Step #4.
Fasten strips to edges of bird feeder.
Step #5 (Option C): Create ends for bird feeder from a different board.
The ends on options 1 and 2 both contain the pith and will eventually crack as the wood dries. If you want your finished bird feeder to be crack free then take the following steps. First allow the log (with the center removed) to dry for several weeks or more. While drying, the bird feeder will shrink crack-free since the pith has been removed. Once dry, create and attach end pieces using cedar wood (or some other naturally rot resistant wood).
Step #6: Hang Your New Bird Feeder.
Bird feeder with cedar ends.
Bird feeder with natural ends.
Pin for later!
Related Articles on Bird Houses, Bird Feeders & More
Use these free DIY bird house plans and bird feeder plans to attract bluebirds, chickadees, flickers, finches, house sparrows, hummingbirds, kestrel, nuthatches, owls, purple martins, swallows, thrushes, warblers, woodpeckers, wrens, and other birds to your garden.