Free bird house plans to create an a-frame nesting box for your birds. This diy birdhouse can be used to attract bluebirds, swallows, chickadees, nuthatches, warblers, woodpeckers, wrens, and other birds to your backyard or garden. Find more bird houses plans or discover more ideas on nesting boxes and bird feeders.
This bird house design can easily be hung from a tree or some other structure using wire, rope, or chain. See simple A-Frame bird house plans for another popular design that can easily be mounted on a pole.
Below is a 3D model of this bird house. An animated video is also provided further down in this article. You can view larger images by clicking on the pictures below.
This woodworking project makes a great family activity. Let the kids help with installing screws, applying a finish, or painting the bird house. Below are the individual pieces used to create this bird house.
Step 1. Prepare the “Sides” of the Bird House.
Cut two pieces of wood as shown below (labeled “A”) using a miter saw, table saw, band saw, or some other saw. Personally, I am using cedar wood.
Step 2. Prepare the “Front” and “Back” of the Bird House.
Cut two pieces of wood as shown below (labeled “B”). In one piece drill an entrance hole using either a spade bit or Forsnter drill bit. A 1.5″ (4 cm) entrance hole is the optimum diameter for bluebirds and tree swallows. However, chickadees, nuthatches, warblers, woodpeckers, and wrens will also gladly make this their home. See Bird House Hole Size if you want to attract a specific bird. Optionally add a Birdhouse Perch.
Step 3. Prepare the “Bottom” of the Bird House.
Cut one piece of wood as shown below (labeled “C”). Drill several 1/4″ (0.5 cm) holes in the floor for drainage.
Step 4. Prepare the “Top” of the Bird House.
Cut one piece of wood as shown below (labeled “D”).
Step 5. Consider Adding a Cleanout Door to Your Birdhouse.
If you use screws to assemble your bird house, it can easily be cleaned out by removing a few screws. See Cleanout Door Ideas for other ways to add an access door for cleaning.
Step 6. Assemble Your DIY Birdhouse.
Use screws to attach the front, back, sides, and top together. Drill pilot holes to help prevent the wood from splitting. Ideally, the pilot holes should be at least as large as the screw’s minor diameter.
Personally, I recommend using stainless steel trim screws as shown below. The smaller screw head is less obvious and helps prevent the wood from splitting. If you pre-drill the holes, these screws will countersink themselves nicely because the head is not much larger than the pilot hole.
Step 7. Optionally paint or finish your birdhouse.
In our case, we applied a linseed-oil. This finish helps accentuate the grain and helps make the wood more resistant to damage.
Step 8. Hang or mount your birdhouse.
Mount your birdhouse and see which bird will call your habitat home. See How to Hang a Birdhouse for the recommended mounting height for various birds.
Your new birdhouse should provide you excitement for many seasons to come. Building a birdhouse can be fun family project. Furthermore, a birdhouse will help encourage neighborhood birds to move in and raise families in your backyard. Hence providing you and your garden natural pest control.
Pin for later!
Related Articles on Bird Houses, Bird Feeders & More
Use these free DIY bird house plans and bird feeder plans to attract bluebirds, chickadees, flickers, finches, house sparrows, hummingbirds, kestrel, nuthatches, owls, purple martins, swallows, thrushes, warblers, woodpeckers, wrens, and other birds to your garden.